MSE=LP600 Digital Optical Position Looper Scanner Technical Info

MSE-LP600 Digital Optical Position Looper Scanner

HOME

MSE-LP600

Description

Technical Info

Housing Info

Data Sheet

Request More Info

The following is Technical Information for the MSE-LP600 Digital Optical Position Looper Scanner.

Specifications

Product Presence Outputs (3 total)	Cradle Relay, SPNO, 250 VAC, 8A NPN & PNP Outputs 400 mA, 45 V, 2A peak Opto-isolated Output 300 V, 150 mA	Supply Voltage	24VDC ±10%
Product Presence Outputs (3 total)		Power Consumption	2 Watts
Analog Output	0 - 10 VDC Standard (optional +/- 10VDC, +/- 15VDC or 4-20mA)	Operating Temperature	-20°C (-4°F) to +50°C (122°F) without air or water cooling -20°C (-4°F) to +60°C (140°F) with air cooling -20°C (-4°F) to +90°C (194°F) inline vortex air cooling +2°C (36°F) to +120°C (250°F) with water cooling
Linear Resolution	±0.2% of full scale	Humidity	Max 90% RH (non condensing)
Response Time	10 milliseconds	Storage Temperature	-20°C (-4°F) to +50°C (122°F)
Product Temp. Limit	Minimum 350°C (662°F) Maximum 1200°C (2192°F)	Self Check	Continuous automatic self check & remote self check facility
Sensing Elements	Electronically In GaAs Photodiode Array (IR filter removes visible spectrum)	Array Scan Time	2 ms

Typical Hot Background Signal	Typical Signal with Passing Hot Bar

Chart illustrating signal from typical hot background	This chart illustrates the control margin. Where the background IR is uniform then the control margin can be set to a lower figure. Any hot product passing needs to give a signal that exceeds the set point.

Performance

Model	MSE-LP600
Horizontal Field of View	15 degree
Horizontal Resolution	40 Bits
Vertical Field of View	1 degree
Reproducibility	Resolution