|
The following is specifications and
dimensional information on the housing for the MSE-HMD85 Self
Contained “All-in-One” Digital Hot Metal Detector.
The MSE-HMD85 Hot Metal
Detector's electronic circuitry is packaged in a robust cast
aluminum housing. The housing includes a large air cooled chamber
which is separated from the electronic circuitry compartment. An air
purge inlet is located in the rear of the cast aluminum housing.
Pressurized air passes though this chamber, cooling the cast
aluminum housing thus cooling the electronic circuitry. The air
vents in the front of the housing via a slot in front of the lens
providing air purging. Further cooling of the air can be
accomplished with the use of an in-line vortex tube air cooler.
As an option, a sealed water coolant
radiator & separate air purging facility can be provided. The copper
water coolant radiator is mounted internal to the air cooled
chamber. Coolant inlet and outlet fittings are provided in the rear
of the cast aluminum housing. An air inlet is fitted in the front
nozzle of the housing and air is vented out the front of the nozzle
in front of the lens.
For severe environments an additional air
purge nozzle can be fitted onto the front of the MSE-HMD85 housing.
The air purge nozzle is constructed of steel with zinc cadmium,
coating and oven baked black paint for long life. This air purge
nozzle is used to further direct the air purge and increase the
pressure to clear steam and particulate from the lens. Is
construction allows for easy attachment to the cast housing with
only an Allen wrench. It has an extra tubing fitting if additional
air purge is required in severe environments.
Housing Specifications
Housing: Aluminum AL6, Oven baked blue paint
Housing Rating: IEC IP66, DIN, 89011
Weight: w/o Cable: 1.9 Kg (4.2 lbs)
Cable Length: 2 m (6.6ft). Also available in
lengths of 5 m (16.4ft), 10 m (32.8ft), and 15m (49.2ft)
Cooling: Standard: -D Water Cooled & Air Purged
Optional:
-A Air Cooled & Air Purged
|
