Industrial Sensors & Measurement
Systems For
Control, Measurement & Management for Metal Mills, Process
Automation, and Overhead Cranes.
Type 9000 Hot
Metal Detector Remote Lenses
Used in conjunction with
MODULOC®
Model 9100 and Model 95100 Remote Hot Metal Detector (HMD) Sensors, these lenses meet
all installation requirements.
Robust lenses for
mounting close to hot product or hot metal where ambient temperatures are subject to
extreme variation. Impervious to water or steam and built to withstand the
harshest mill environments
Used in conjunction with flexible armored
stainless steel outer sheathed fiber optic cables,
theses remote mounted lenses provide a high level of accuracy by allowing the selection
of the ideal
lens arrangement for the installation. There are four styles of lenses
available.
Type 9000
FR2 Remote Lens - ½° x 25° FOV with
SLB-A "L"
Mounting Bracket.
Type MD9000
FR Precision Slit Rectangular Remote Lens.
Incorporating the following features:
Robust cast aluminum housing rated IP66 with unique air purge &
cooling facility.
Optional
Water Cooling with separate air purge available.
Gunsight
Alignment
Internal 5° & 15° vertical
shuttering option.
Slide flange mounting.
Ambient temperature rating of 160°C
Used in conjunction with "Fishtail"
flexible armored fiber optic cables.
Type 9000 SR2 Remote Lens
- 2° x 15° FOV with
Integral "L"
Mounting Bracket
Type
SR Stainless Steel
Slit Lens
2° x 15° Field of View.
Incorporating the following features:
Separate air
purged columnator tube option.
Ambient temperature rating of 400°C.
Slit field of
view at low cost
Used in conjunction with "Fishtail" flexible armored
fiber optic cables.
Highly suitable where rod &
bar bounces about the center line.
Type SR Lens Information
Lens Type
SR2
Field of View (FOV)
2°x15°
Scanned Area (mm)
at 1 meter
20 x
250
Housing:
Stainless Steel
Housing Rating:
IEC IP66, DIN, 89011
Weight:
1.5
Kg
Temperature Rating:
-20°C to +400°C
Dimensional Information
Series 9100 Hot Metal
Detector Sensor
F2 Remote Lens - 2° FOV
Series 9100 Hot Metal
Detector Sensor
F4 Remote Lens - 4° FOV with Fiber Optic Lead
Mounted in a PBA-27 Air Purged/Cooled Aluminum Mounting Block
with a LSS-36 Universal Lift/Swivel Mounting Stand
Series 9100 Hot Metal
Detector Sensor
F4 Remote Lens - 4° FOV with Fiber Optic Lead
Mounted in a PST-07 Air Purged Stainless Steel Lens Holder
with a LSS-36 Universal Lift/Swivel Mounting Stand
Stainless
Steel Tubular Lenses
1°, 2°, 4° or 7° Spot Field of View.
Incorporating the following features:
Standard 25 mm diameter housing for all lenses.
Detached air
purge facility via lens mount
Ambient temperature rating of 180°C or
400°C.
Used in conjunction with tubular flexible armored
fiber optic leads
Inexpensive lenses that are
straightforward to install and extremely rugged construction. Ideal for
product tracking and getting close to hot product.
Type F Lens Information - 180°C
Lens Type
F2
F4
F7
Field of View (FOV)
2°
4°
7°
Scanned Area (mm) at 1 meter
40
80
120
Type H Lens Information - 400°C
Lens Type
H1
H2
H4
H7
Field of View (FOV)
1°
2°
4°
7°
Scanned Area (mm) at 1 meter
20
40
80
120
Housing:
Stainless Steel, 25mm diameter
Housing Rating:
IEC IP66, DIN89011
Temperature
Rating:
Type F:
-20°C to
+180°C
Type H:
-20°C to
+400°C
Dimensional Information
Dimensional Information - for both
type F & H
Lens Type
H1
F2/H2
F4/H4
F7/H7
Field of View (FOV)
1°
2°
4°
7°
"X" Dimension
190
130
110
80
Series 9100 Hot Metal
Detector Sensor
Q1 High Temperature Quartz Rod Remote Lens - 1°
FOV with ACP-1199 Shrouded Air Purged/Cooled Lens Holder.
4. Type
Q1 High Temperature Quartz
Rod Lens, shielded 1° Spot Field
of View.
Specifically
for mounting in exceptionally high ambient temperature areas adjacent to furnaces,
casters, hot
slabs, hot billets or hot strip. Withstands 1300°C radiant heat and provided in a robust
lens shroud with protective nozzle and air purge facility.
High volume air purge allows for mounting beneath the line.
Used in conjunction with tubular flexible armored fiber optic
leads
Type Q1 Lens Information
Lens Type
Q1
Field of View (FOV)
1°
Scanned Area (mm)
at 1 meter
20
Housing:
Stainless Steel
Housing Rating:
IEC IP65, DIN89011
Temperature
Rating:
Ambient:
-20°C to +1000°C
Radiant:
+1300°C Maximum
Dimensional Information
Fiber Optic Cables:
LG-XX-AB
Fiber Optic
Cable, Tubular, Flexible, Armored Stainless
Steel Outer Sheath, 2
meters to 15 meters in 1 meter length,
180°C (356°F) Rating
LGH-XX-AB
Fiber Optic
Cable, Tubular, Flexible, Armored Stainless
Steel Outer Sheath, 2
meters to 15 meters in 1 meter length,
400°C (752°F) Rating
LG-XX-CB
Fiber Optic
Cable,
"Fishtail" Flexible,
Armored Stainless
Steel Outer Sheath, 2
meters to 15 meters in 1 meter length,
180°C (356°F) Rating (for use with Slit Rectangular Lenses
LGH-XX-CB
Fiber Optic
Cable,
"Fishtail" Flexible,
Armored Stainless
Steel Outer Sheath, 2
meters to 15 meters in 1 meter length,
400°C (752°F) Rating (for use with Slit Rectangular Lenses
Mounting Accessories:
BPA-07
Standard Tubular Lens Mounting Block,
Aluminum construction, provides air cooling and purging
PST-01
Air Purged Tubular Lens Holder, Stainless Steel construction provides
air purging for 1° lenses
PST-07
Air Purged Tubular Lens Holder, Stainless Steel construction provides
air purging for 2°, 4° & 7° lenses
PWST-01
Water Cooled & Air Purged Tubular Lens Holder, Stainless
Steel construction provides water cooling and air purging for 1° lens.
PWST-07
Water Cooled & Air Purged Tubular Lens Holder, Stainless
Steel construction provides water cooling and air purging for 2°, 4° &
7° lenses.
ACP-1199
Shrouded Lens
Holder, Stainless Steel construction, provides air cooling and air
purging for Part No. Q1 Quartz Lens
LSS-36
Universal
Swivel/Lift Mounting Stand. Provides 25 mm height adjustment, +/- 45°
vertical swivel and up to 360° horizontal rotation.
SLB-A
Standard “L” Mounting
Bracket, Provides Horizontal adjustment and +/- 45° Vertical adjustment.
MODULOCTechnology - The Total Sensor Solution
The
MODULOCModel MD95100
Remote Hot Metal Detector (HMD) Sensor
and the Series 9000 Remote Hot Metal Detector Lenses are part of the
MODULOC
Steel Mill Sensor Group
Disclaimer Moduloc Sensor Enterprises,
Ltd is not associated in anyway, means, shape or form with the former company Moduloc Control Systems Ltd of the United Kingdom
